ML-CPK-F Series
•Easy operation with touch pad
•Histogram display, Panel size: 93×93mm
ML-CPK-F SERIES DIGITAL INDICATOR
The Graphic indicator / Graphic signal of Time&load Torque pressure
The slim and light-panel type, 1~4 chs
3.5 TFT COLOR LCD TOUCH
Converting the switch on input signal with time to graphic signal
Frequency set-up (maximum 1000hz) ( Read: 1000/Secs )
Graph singal function (Only 1ch)
RS232C output , I/O Interface
OK/NG: Counting on quantity
14BIT AD: High precision is available through convertor
Three languages are available (english, chinese and korean)
ML-CPK-F SERIES :
It estimates Graphs of The time and data 10 times a second.
It is used in processing of clamp-off with Load cell.
It designates tolerance sections and marks results.
Specification
Model | ML-CPK-R Series |
Use | Run-out |
Association | peak-peak, Max, Min |
Channel | 1-4ch |
Sampling data | 1000times a second |
Resolution | 1/1000mm or 1/100 (Option: 1/10000mm) |
Indicator | 3.5 TFT COLOR LCD TOUCH |
Size(mm) W x H x D | 100x100x160 |
Power Input | AC100 ~ 220V 50Hz/60Hz |
Data communication | RS232C (Option: RS485) |
I/O port | 6 inputs(Start 1, Zero 1, Model 3) / 6 outputs(Ready 1, OK/NG 2) / Option: 25points |
Compatible Probes | DP-S4 series, DP-10 series, DP-25, other companies HBT probes / Option: LVDT or other analog sensors, Digital gauges |
● Time&Load Graphic
MODEL SIZE
CUT SIZE 91mmX91mm : It is convenient to be installed as a panel indicator
Order Code
Circuity ( NPN Output-specification )
INPUT ( START ): INPUT CURRENT : MAX 10mA
OUTPUT ( OK, NG, READY ): VOLTAGE : MAX 30V CURRENT : MAX 300mA
Transmission specification ( RS232C ) | |||
Item | Specification | ||
∙ Interface | RS232C | ||
∙ Port | D-Sub 9pin RS232C Port ⇨ 1ch | ||
∙ Synchronization | Asynchronous | ||
∙ Bit type | DATA BIT ⇨ 8 Bit | ||
PARITY BIT ⇨ None | |||
STOP BIT ⇨ 1 Bit | |||
∙ Transmission | ASCII/HEX cord | ||
- 115200/57600/38400/19200/9600 bps | |||
The mode of output: Binary | |||
STX | STATUS | MEASURING DATA | ETX |
( 1 Byte ) | ( 1 Byte ) | ( n Byte ) | (1 Byte) |
( n = Transmit Data Q'ty x 2 ) |
The mode of output: ASCII | |||||||||||
Byte | 1 | 2 | 1 | 2 | 1 | 5*n+(n-1) | 1 | 1 | 2 | 1 | 1 |
Char | ENQ | Start Data Num. |
, | End Data Num. |
, | Data | , | ETX | @@ | CR | LF |
The estimation : either Ok signals or more than 2 digits of output | ||||||||||||
1 | 2 | 1 | 2 | 1 | 5 | 1 | 5 | 1 | 1 | 2 | 1 | 1 |
ENQ | OK | , | 2 | , | 43 | , | -25 | , | ETX | @@ | CR | LF |
input/output specification ( D-SUB 15PIN ) | ||||
Pin numbers | Name | Direction | Explaination | |
1 | NCOMMON | 0 V | GND Terminal | |
2 | PCOMMON | +24V | 24V Terminal | |
3 | Model 2 | input | ||
4 | Model 1 | input | ||
5 | Model 0 | input | ||
6 | Recall | input | ||
7 | ZERO | input | H/L | ZERO |
8 | START | input | H/L | Starting signal |
9 | output | |||
10 | READY | output | H/L | Ready signal |
11 | output | |||
12 | output | |||
13 | NG | output | H/L | NG singal |
14 | OK | output | H/L | OK signal |
※ it is modifiable for imput/output number through set-up |