ML-LPK-R Series
•7” Color TFT LCD
•Easy operation with touch pad
•Data saving on Micro SD card.
•Support user’s measuring screen editor.
•Panel purpose(option), Panel size: 219×119mm
MP-LPK-R Series
The precise indicator to measure High speed run-out with 16chs / Run-out, Roundness, Concentricity
Micro SD: DATA Back-up Function
Compact Size, Panel type indicator with 1~4chs
37" TFT LCD TOUCH DISPLAY
Peak-Peak
Frequency set-up (maximum 5000hz) ( Read: 5000/Secs )
Graph singal function
RS232C output , I/O interface
OK/NG Quantity-counting function
16BIT AD High precise esimation is available
Three languages are available(english, chinese and korean)
- ML-LPK-R SERIES : The estimation on Peak- peak , Max, Min of Kinetic object during some times.
It is used in calibration on Run-out, Roundness, External diameter
SPECIFICATION
Model | ML-LPK-R Series |
Use | Run-out |
Association | peak-peak, Max, Min |
Channel | 1-4ch |
Sampling data | The minimal 5000 times a second |
Resolution | 1/1000mm or 1/100 (Option: 1/10000mm) |
Indicator | 7 TFT COLOR LCD TOUCH |
Size(mm) W x H x D | 220x120x192 |
Power Input | AC100 ~ 220V 50Hz/60Hz |
Data communication | RS232C |
I/O port | 6 inputs / 6 outputs |
Compatible Probes | DP-S4 series, DP-10 series, DP-25, other companies HBT probes / Option: LVDT or other analog sensors, Linear gauges |
● The inspection of a moter's run-out
●The inspection of Thickness and Run-out
Model Size
ML-LPK SERIES | ||||||||
Common specification | 37" TFT LCD TOUCH DISPLAY Micro SD: DATA Save/ Back-up Function MICRO SD Data back-up/Saving function D-SUB 15PIN I/O INPUT/OUTPUT FUNCTION ( Input : 6points , Output : 6points ) Three languages are available (english, chinese and korean) Sensor's forward and backward direction is available PRESET function revision function RS232C |
R Model | The precise indicator to measure High speed run-out with 16chs Peak-Peak,Frequency set-up (maximum 5000hz) ( Read: 5000/Secs ) Graph singal function The model for Run-out, Roundness, Concentricity |
Order code
Circuitity ( NPN input specification )
INPUT ( START ) : INPUT CURRENT : MAX 10mA
OUTPUT ( OK, NG, READY ):VOLTAGE : MAX 30V CURRENT : MAX 300mA
transmission specification ( RS232C ) | |||
item | specification | ||
∙ interface | RS232C | ||
∙ port | D-Sub 9pin RS232C ⇨ 1ch | ||
∙ synchronization | Asynchronous | ||
∙ composition | DATA BIT ⇨ 8 Bit | ||
PARITY BIT ⇨ none | |||
STOP BIT ⇨ 1 Bit | |||
∙ Transmission | ASCII/HEX | ||
115200/57600/38400/19200/9600 bps |
the mode of output: Binary | |||
STX | STATUS | MEASURING DATA | ETX |
( 1 Byte ) | ( 1 Byte ) | ( n Byte ) | (1 Byte) |
( n = Transmit Data Q'ty x 2 ) |
the mode of output : ASCII | |||||||||||
Byte | 1 | 2 | 1 | 2 | 1 | 5*n+(n-1) | 1 | 1 | 2 | 1 | 1 |
Char | ENQ | Start Data Num. |
, | End Data Num. |
, | Data | , | ETX | @@ | CR | LF |
The estimation : either Ok signals or more than 2 digits of output | ||||||||||||
1 | 2 | 1 | 2 | 1 | 5 | 1 | 5 | 1 | 1 | 2 | 1 | 1 |
ENQ | OK | , | 2 | , | 43 | , | -25 | , | ETX | @@ | CR | LF |
input/output specification ( D-SUB 15PIN ) | ||||
Pin number | Name | Direction | explaination | |
1 | NCOMMON | 0 V | GND terminal | |
2 | PCOMMON | +24V | 24V terminal | |
3 | Model 2 | input | ||
4 | Model 1 | input | ||
5 | Model 0 | input | ||
6 | Recall | input | ||
7 | ZERO | input | H/L | zero |
8 | START | input | H/L | starting signal |
9 | output | |||
10 | READY | output | H/L | ready signal |
11 | output | |||
12 | output | |||
13 | NG | output | H/L | NG signal |
14 | OK | output | H/L | OK signal |
※ it is modifiable for input/output numbers through set-up |